Asnes

X-Skin 45mm is produced in 100% mohair by Colltex in Switzerland for optimal speed and grip.

X-Skin skins can be used on all Åsnes skis with a skin insertion point.

To further enhance its performance, we recommend impregnating the skins with wax or skin impregnation to provide better glide and reduced friction.

Short climbing skins from Åsnes are delivered in a practical bag customized for X-Skin, which can be attached to your backpack or belt. The bag has a perforated fabric on the bottom, allowing the skin to dry and water to flow out.

At 45mm, this skin is perfect for the Nansen, Amundsen, Gamme 54, Finnmark 54, Cecilie, Sondre and Liv skis – but is well suited to all Åsnes skis.

Equipped with a skin-protector at the front to prevent ice and snow accumulating on it and to secure it for long distances.

Maintenance and storage:

To preserve the quality of skins as long as possible, we recommend they should always be kept clean, immediately dried after usage, and periodically waxed or proofed. It is best to store this skin in the accompanying bag.

Length 650 mm

Width 45 mm

Weight 200 gr. pr. par

X-Skin 45mm is produced in 100% Nylon by Colltex in Switzerland for optimal speed and grip.

X-Skin skins can be used on all Åsnes skis with a skin insertion point.

To further enhance its performance, we recommend impregnating the skins with wax or skin impregnation to provide better glide and reduced friction.

Short climbing skins from Åsnes are delivered in a practical bag customized for X-Skin, which can be attached to your backpack or belt. The bag has a perforated fabric on the bottom, allowing the skin to dry and water to flow out.

At 45mm, this skin is perfect for the Nansen, Amundsen, Gamme 54, Finnmark 54, Cecilie, Sondre and Liv skis – but is well suited to all Åsnes skis.

Equipped with a skin-protector at the front to prevent ice and snow accumulating on it and to secure it for long distances.

Maintenance and storage:

To preserve the quality of skins as long as possible, we recommend they should always be kept clean, immediately dried after usage, and periodically waxed or proofed. It is best to store this skin in the accompanying bag.

Length 650 mm

Width 45 mm

Weight 200 gr. pr. par

The special 45mm NATO X skin is adapted for the Combat NATO ski, produced in 100% Nylon from Colltex in Switzerland. This short skin can be used on the Åsnes Combat NATO skis with a skin insert. The skin is made of Nylon for optimal durability and grip. Nylon skins are excellent suited for wet and heavy snow. If you want a better performance from skin we advise you to impregnate the skins, which will provide a better glide.

The X Sin 45mm NATO is intended for long and hard expeditions where the skin is exposed to rough handling.

This skin has been used by the military and Expeditions, and has been relied up on time and time again because it delivers.

Skins from Åsnes are delivered in a practical bag customized for climbing skins, which can be attached to your backpack or belt. The bag has perforated fabric on the bottom, which ensures that the skin dries and the water flows out of the bag.

Åsnes short skin is equipped with a skin-protector in front to avoid ice/snow filling the skin and to secure the skin on long distances.

Maintenance and storage

To retain the quality of the skin as long as possible, we recommend to always keep the skins clean, immediately dry them after usage, and apply skin glue and impregnation periodically. Additionally, store the skins in the accompanying bag.

Length 600 mm

Width 45 mm

Weight 200 gr. pr. par

Full length climbing skins from Asnes (made by Colltex) is produced in 100% Mohair improved speed and outstanding grip. This is a skin with less friction than a nylon skin, although at the expense of nylon’s durability.

It is possible to enhance this skin’s performance by waxing it. This skin is 45mm wide and 2100mm long and can be adapted to most Nordic backcountry skis.

Maintenance and storage of climbing skins:

To preserve your climbing skin’s properties, we recommend that you keep it clean, dry it after use, and regularly impregnate/ wax it. Store the climbing skin in the supplied bag somewhere cool and dark.

This skin is 45mm wide and 2100mm long, suits most Back Country models like Nansen, Amundsen, Gamme, etc.

Length 210 cm

Width 45 mm

Weight 280 gr. pr. par